It's been a while since our last blog entry, but an exciting new chapter in the Furry household unfurls as I write! The countdown has begun. In roughly 14 days, we will hear the peeping of little chicks. (The gestation period for chicken eggs is 21 days.)
We have an incubator all set up and we now have eggs! We went to our
local farmer's market last week to arrange a pick up of our dozen Delaware eggs at the rock bottom price of $2.50 from our friends Mike and Chris Chester at
Always Somethin' Farm. They were kind enough to let us borrow a great little book called
"A Guide to Better Hatching" by Janet Stromberg. It's out of print, but you may be able to locate a used copy online. I found another excellent site that was created by the
University of Illinois Extension. It gives helpful information explaining the operation for a still air incubator (excellent for us, as we do not have instructions for the one we are borrowing from our aunt). Our incubator has an automatic egg turner too. Our aunt has used it many times in her classroom over the years as a first-grade teacher. We received a new thermometer before using it because they lose there accuracy over time, and temperature is an essential part of incubating correctly.
Our aunt gave us some great pointers so we could get the incubator setup correctly:
- A well (called the moisture channel) inside the bottom of the incubator holds water to keep the eggs moist.
- Each egg nestles into cradles, and the eggs need to be placed skinny point down. The airspace in the egg is at the largest and widest part of the egg.
- Two windows allow for checking the temperature, which we set as close to 99.5 degrees as possible. Temperatures vary according to the type of incubator you have, so do the research before using your particular incubator.
Another pointer our aunt gave us was to watch for excessive moisture buildup on the windows. If we see that, we pull one of the red vent plugs to air the incubator out a little. Our eggs are currently rocking away, and we're so excited to see what hatches.
We also picked up a chick starter kit at Tractor Supply for about $20. It has a waterer and food feeder, a small bag of chicken feed starter, a box to put the chicks in for safe transport, a little cardboard corral for them to safely play outside (supervised) and some coupons for chicken-related products at the store. We also picked up a heat lamp and light bulb for it.
We are getting to the point were we can check the eggs and toss out the bad ones. I purchased an Ova Scope after reading
Jennifer Sartell's awesome blog post reviewing the
Brinsea Ova Scope. I scoured the Internet for a good deal on the scope. It's a large expense at $70 with shipping, but I think the girls will really enjoy being able to see their chickens growing inside the eggs and we will use it again. It will also be fun to share with our friends and family when the eggs are hatching too. We'll have a blog for you about that in the next week or two and a video of the chicks inside their eggs (we hope)!
We still have no coop, but we'll report on that, too, as we press forward. A couple of weeks ago, we received some great freebies for the coop from my godfather, which I'll post about soon. He also helped us with the coop design and supply list. We should be able to make our coop, which includes a fenced-in run, for about $100. Not too shabby. I'll be keeping track of the receipts as we buy our supplies to see how close we come to hitting the mark!
3 Comments:
Awe, thanks for the shout out Kimberly! I'm glad you got an Ova Scope I think they're really cool! Good luck with the new little ones.
By
Jennifer Sartell, At
August 8, 2011 2:53 PM
Your aunt's advice to "Each egg nestles into cradles, and the eggs need to be placed skinny point down." contradicts the U of I Extension's article on incubating eggs which says "Place eggs on their side with small end pointed slightly down." In the nest a hen cannot stand her eggs up on end so I suspect that the U of I article is correct.
By
Randy Kimball, At
August 10, 2011 7:59 AM
Thank you for clarifying Randy. It can be lengthwise so the widest part of the egg is elevated. I encountered a problem when I placed our eggs lengthwise. They fell out of the cradle and I cracked a couple in the process.
I pulled this directly from "A Guide to Better Hatching" by Janet Stromberg to share with others: "It must be noted around the 12th or 14th day, the embryo is forced to assume a lengthwise position within the egg. In making this change, the head always seeks the highest point in the egg. Should the small end of the egg be up at this time the embryo will assume a position with its head in the small end away from the air cell . . . The proper position of the chick when ready to hatch is with its head in the air cell end of the egg. If the embryo is positioned with its head in the small end of the egg, it's practically impossible for the chick to hatch, although it may pip the shell. When an egg is laying on its side the natural shape sufficiently elevates the large end."
By
Gaia Garden Girl, At
August 10, 2011 10:59 PM
Post a Comment
Subscribe to Post Comments [Atom]
Tweet
<< Home